Cement clinker is made of limestone, clay and iron raw materials as the main raw materials. It is prepared into raw materials in an appropriate ratio, burned until partially or completely melted, and cooled to obtain semi-finished products. In the cement industry, the main chemical components of Portland cement clinker are calcium oxide, silica and a small amount of alumina and iron oxide. The main mineral composition is tricalcium silicate, dicalcium silicate, tricalcium aluminate and tetra calcium iron aluminate. Portland cement clinker and appropriate amount of gypsum are ground together to form Portland cement. Under normal circumstances, it is mainly composed of CaO.SiO2.Al2O3 and Fe2O3, the total content of which is usually above 95%.
The limestone is fed into the bucket elevator and subsequently transported to the raw material warehouse for grinding.
After grinding, the finished products are gathered by powder concentrator, and then conveyed to a screw conveyor.
The finished products are transported to the storage warehouse, while the excess gas is filtered by the dust collector.
The whole system is equipped with three pulse dust collectors to guarantee that the whole system is free of dust leakage.
The system is outfitted with an intelligent PLC control cabinet and an upper computer.
The system is equipped with an intelligent PLC control cabinet and an upper computer.
The Cement Clinker is mainly for making cement.
If you would like to receive personalized solutions and a free quote, kindly provide your information below.
